How to find out other devices mac address using terminal emulator

How to find out other devices mac address using terminal emulator serial#
How to find out other devices mac address using terminal emulator software#

Scream's вЂњGCFPingвЂќ feature can send a special UDP packet to any configured address. 4.2.1.3 Address discovery - GCFPing the multicast address You can add the Affinity to Scream's list of servers by clicking the appropriate button. When Scream notices a DHCP negotiation with an appropriate MAC address, it will display the allocated IP address in the window. Power up the Affinity and allow it a minute to boot. Right-click in the server list-box and select вЂњ Detect servers вЂ¦вЂќ - Scream will then start monitoring DHCP traffic on the local network. Then, from Scream's вЂњ Network controlвЂќ window, select the вЂњ My ClientвЂќ tab. 4.2.1.2 Address discovery вЂ“ Scream's вЂњDetect serversвЂќ tool In practice, most networks today are still IPv4, as in the above example. Note: With an IP version 6 network, the IP address will be on a line beginning inet6. The IP address that has been assigned is shown on the line beginning inet - in this case, it is 192.168.0.90 (with a netmask of 24 bits indicated by /24). The first line of the output should contain the word UP, confirming that the adaptor has been enabled. The key things to note here are the adapter status and the IP address.

How to find out other devices mac address using terminal emulator serial#

You can connect via a serial port (as described in sectionВ 4.3) and issue the ip command:Дў: eth0: mtu 1500 qdisc pfifo_fast qlen 1000 4.2.1.1 Address discovery вЂ“ serial connection

How to find out other devices mac address using terminal emulator software#

This allows an Affinity to be detected using Guralp Discovery Software - see sectionВ 4.2.1.5 for details. If your network includes GГјralp Minimus digitisers, Minimus+ digitisers or Fortimus accelerometers, you can enable the guralp-responder service. If you cannot learn the IP address in this way, there are three methods available to discover which address has been allocated. The MAC address is displayed by the ip command вЂ“ in the example in sectionВ 4.2.1.1, it is 00:50:c2:40:54:75. When using DHCP, it is recommended that the DHCP administrator allocates a fixed IP address to the Affinity's MAC address in order to avoid unexpected address changes. The LCD display shows lots of information so you may have to wait a short time until the IP address scrolls into view. If your Affinity has an LCD status display, the assigned address will be displayed in it. Your network administrator should then be able to tell you the address that has been assigned. If your network uses DHCP to assign addresses, simply connect the Affinity to the network and wait a few minutes for the process to complete. The Affinity is supplied configured for DHCP. The web-configured address will take effect when the unit is next rebooted.

Note: If you are setting up a unit in the laboratory for subsequent deployment in the field, you can set up the final network address using the web interface but then over-ride it with a temporary, static network address using the command line.